Fájl / File menu


Új projekt / New project command
Új projekt varázsló / New project wizard command
Projekt megnyitása... / Open project... command
Képek importálása... / Import images... command
Projekt bezárása / Close project command
Projekt mentése / Save project command
Projekt mentése másként... / Save project as... command
Projekt archív mentése... / Save project archive as... command
Aktuális kép mentése... / Save current image as... command
Projekt tulajdonságok / Project properties command
Projekt megjegyzések / Project notes command
Profilszervező / Profile organizer command
Aktuális kép nyomtatása... / Print current image... command
Nyomtatási kép / Print preview command
Oldalbeállítás / Page setup command
File 1, 2, ... command
Kilépés / Exit command



 

Új projekt / New project command

Use this command to create a new Panorama Factory project.

You can open an existing project with the Projekt megnyitása... / Open project... command.

Shortcut          CTRL+N


top


 

Új projekt varázsló / New project wizard command

Use this command to create a new Panorama Factory project using the Wizard.  To learn more about using the wizard, see Chapter 3, “Using the Stitching Wizard to make a panorama.”

To create a blank panorama project, use the Új projekt / New project command (Fájl / File menu) instead.

You can open an existing project with the Projekt megnyitása... / Open project... command.


top


 

Projekt megnyitása... / Open project... command

Use this command to open an existing project in a new window. . The Panorama Factory displays the Open dialog box so you can select the project to open.

You can create new projects with the Új projekt / New project command or the Új projekt varázsló / New project wizard command.

You can open multiple projects at the same time only if you enable the Multiple Document Interface (MDI).  You use the Kompatibilitás / Compatibility tab of the Beállítások / Options dialog (Eszközök / Tools menu) to enable MDI. When MDI is enabled, you can use the Window 1, 2, ... command (Ablak / Window menu) to switch among the projects you have opened.

Shortcut          CTRL+O


top


 

Képek importálása... / Import images... command

Use this command to import one or more image files into your Panorama Factory project. The Panorama Factory displays the Képek importálása / Import Images dialog box so you can select the images to open. When you open images, The Panorama Factory places them at the end of the imported thumbnails. When you open multiple images at the same time, The Panorama Factory loads them in alphabetical order.


top


 

Projekt bezárása / Close project command

Use this command to close all windows containing the active project. The Panorama Factory suggests that you save changes to your project before you close it. If you close a project without saving, you lose all changes made since the last time you saved it. Before closing an untitled project, The Panorama Factory displays the Save As dialog box and suggests that you name and save the project.

You can also close a project by using the Close icon on the project's window.


top


 

Projekt mentése / Save project command

Use this command to save the active project to its current name and directory. When you save a project for the first time, The Panorama Factory displays the Save As dialog box so you can name your project. If you want to change the name or directory of an existing project before you save it, choose the Projekt mentése másként... / Save project as... command.

Panorama Factory projects are actually a collection of files – see Chapter 14, “Panorama Factory projects.”

Shortcut          CTRL+S


top


 

Projekt mentése másként... / Save project as... command

Use this command to save and name the active project. The Panorama Factory displays the Save As dialog box so you can name your project.

To save a project with its current name and directory, use the Projekt mentése / Save project command.


top


 

Projekt archív mentése... / Save project archive as... command

Use this command to save and name the active project. The Panorama Factory displays the Save As dialog box so you can name your project. An archival save differs from an ordinary save in that you normally store only the imported image files and thumbnail image files with the archived version. Computed images are not normally stored with the archived version because The Panorama Factory can recompute them when you read the archive.

The Projekt tulajdonságok / Project properties dialog box (Fájl / File menu) lets you control which computed images are written when you archive your project. You can also designate a different set of computed images to write when you save your project normally.


top


 

Aktuális kép mentése... / Save current image as... command

Use this command to save and name the current image. The Panorama Factory displays the Kép mentése másként / Save Image As dialog box so you can name your file. Naming the image file with a .tif, .bmp or .jpg extension determines the image file format.

To save the entire Panorama Factory project, use the Projekt mentése / Save project command, Projekt mentése másként... / Save project as... command or Projekt archív mentése... / Save project archive as... command.

Shortcut          CTRL+V


top


 

Projekt tulajdonságok / Project properties command

Use this command to view and edit properties of your Panorama Factory project. This command displays the Projekt tulajdonságok / Project properties dialog box.


top


 

Projekt megjegyzések / Project notes command

Use this command to view and edit notes stored with your Panorama Factory project. This command displays the Projekt megjegyzések / Project notes dialog box.


top


 

Profilszervező / Profile organizer command

Use this command to view and edit Panorama Factory profiles.   This command displays the Profilszervező / Profile organizer dialog box.


top


 

Aktuális kép nyomtatása... / Print current image... command

Use this command to print the current image. This command presents a Print dialog box, where you may specify the the number of copies to be printed, the destination printer, and other printer setup options.

Shortcut          CTRL+V


top


 

Nyomtatási kép / Print preview command

Use this command to display the current image as it would appear when printed. When you choose this command, the main window will be replaced with a print preview window in which one or two pages will be displayed in their printed format. The Print preview toolbar offers you options to zoom in and out of the view and initiate a print job.


top


 

Oldalbeállítás / Page setup command

Use this command to set the paper size, margins, orientation of the image on the page (portrait or landscape) and layout of the image. This command presents the Oldalbeállítás / Page setup dialog box, where you specify the printing options.


top


 

File 1, 2, ... command

The Panorama Factory displays a list of recently used project files at the bottom of the Fájl / File menu. Choose the number that corresponds with the project you want to open..


top


 

Kilépés / Exit command

Use this command to end your Panorama Factory session. The Panorama Factory prompts you to save projects with unsaved changes.


top



© 1999-2007, Smoky City Design, LLC
Updated: April 6, 2007