home

Topics Topics Edit Profile Profile Help/Instructions Help Register Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  

Joining two scanned images

The Panorama Factory Forum » The Panorama Factory FAQ » Joining two scanned images « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Lawrence Sammeroff
Posted on Monday, January 07, 2002 - 7:24 pm:   Edit PostDelete Post

I wish to make, for my personal use, printed inserts for CD's from LP Covers. The covers cannot be fully scanned in a conventional scanner. I wish to scan left and right side images and then stitch them together. I have found this impractical with "QuickStitch" as it refuses to join mages with a differnt size, and it is not always easy to crop scanned mages of exactly equal size.
How would "Panorama" handle this problem?
Regards,
Lawrence Sammeroff, Glasgow, Scotland
Top of pagePrevious messageNext messageBottom of page Link to this message

John Strait
Posted on Sunday, January 20, 2002 - 11:29 am:   Edit PostDelete Post

The Panorama Factory also requires images to be the same size. However, it provides a trimming tool to help you achieve this.

Follow these instructions to trim your images:

Run the Trimming properties dialog (Tools menu). Select the Fixed-size rectangle radio button. Enter the width and height of the smallest image. Then trim each image to the specified size:

1. Double-click each imported image in turn.
2. You'll see a large red rectangle on the image. This is the trimming rectangle. Its size is what you entered on the Trimming properties dialog.
3. Move the trimming rectangle to include the part of the image you want to keep.
4. Use the Approve command (Image menu, right-click menu or green checkmark on the toolbar) to trim the image.
5. Move to the next imported image with ALT+Arrow Key or by returning to the imported image thumbnails with the Show imported images command (View menu) or the toolbar button showing little thumbnails.

You will also need to disable the image warping to stitch flat scanned images like these. You disable the image warping (curve distortion) by selecting Swing lens or rotational camera on the Camera properties dialog (Tools menu).

This method works well to stitch a row of flatbed scans into a larger image.

The Panorama Factory does not directly support mosaic stitching (two-dimensional array of images), but you can use it to stitch the individual image rows, save these images, and then use it again to stitch the rows together into a large image.

See the FAQs Stitching scanned images of large photos and Multi Row stitching for more information.
Top of pagePrevious messageNext messageBottom of page Link to this message

Z Jawad
Posted on Thursday, March 13, 2003 - 9:39 am:   Edit PostDelete Post

How do you select more than one image to stitch together?
Top of pagePrevious messageNext messageBottom of page Link to this message

John Strait
Posted on Thursday, March 13, 2003 - 11:10 am:   Edit PostDelete Post

You use the Stitch command (New image menu) to stitch a set of images together.

By default, The Panorama Factory will attempt to stitch all of the computed thumbnails. If there are no computed images, The Panorama Factory will attempt to stitch all of the imported thumbnails. If you wish stitch a subset of the images, you should select the thumbnail images you want to stitch.

You can select a single thumbnail by single-clicking it. If you hold the SHIFT key while clicking, you extend the selection so that a set of adjacent images is selected. If you hold the CTRL key while clicking you toggle the selection of a single image, changing it from unselected to selected or vice versa.

If the images are in the wrong order, you can drag a set of selected images to move them to a different position in the thumbnails list.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nick Wedd
Unregistered guest
Posted on Wednesday, November 26, 2003 - 4:49 pm:   Edit PostDelete Post

My purpose is to stitch together scanned images of maps that are too large to fit in my scanner in one pass. I have tested this, and I have also tested stitching by taking one large image and separating it into two overlapping parts, one of them rotated slightly.

I find that I do not get a good match at all. I have set my "camera" to "Swing Lens or rotational camera" as recommended, but it does not help. I hope that there is something simple I have overlooked - The Panorama Factory is so easy to use, and I feel it must be able to do a stitch that only involves translation and in-plane rotation, with no warping.
Top of pagePrevious messageNext messageBottom of page Link to this message

John Strait
Moderator
Username: Jstrait

Post Number: 42
Registered: 5-2001
Posted on Thursday, November 27, 2003 - 11:34 am:   Edit PostDelete Post

You wrote that one of your images is slightly rotated. The Panorama Factory does not perform automatic rotation as part of the stitching process. This probably explains why you are not getting a good match.

Fortunately, you can use the Rotate command (New image menu) to rotate the images before stitching. For more information, see the FAQ Small amount of rotation.
Top of pagePrevious messageNext messageBottom of page Link to this message

J smith
Unregistered guest
Posted on Wednesday, September 29, 2004 - 9:55 am:   Edit PostDelete Post

the function you are really look for is array, not stitch under the new image menu. you choose whether its horizontal or vertical and take each row or column in turn and 'array' them together. No exact size matching required on this function.
Top of pagePrevious messageNext messageBottom of page Link to this message

Roland Heckert
New member
Username: Heckert

Post Number: 1
Registered: 6-2005
Posted on Monday, June 13, 2005 - 4:00 am:   Edit PostDelete Post

how can i put the company logo and a small text (the date and time for instance) to the panorama in one corner?

The source pictures of course can have such information but by stitching it leads to a desastrous result.

i know the software can do it. i have seen it in the final picture before buying. there was your webaddress centered in the picture. i want it in a corner and not so large.
Top of pagePrevious messageNext messageBottom of page Link to this message

John Strait
Moderator
Username: Jstrait

Post Number: 191
Registered: 5-2001
Posted on Monday, June 13, 2005 - 7:47 am:   Edit PostDelete Post

The watermarking in The Panorama Factory is a special purpose function designed to support the "try before you buy" software distribution method. It can add only the specific image graphic that you saw before you purchased the software and does not have general purpose logo and/or text capability or the ability to position the image.

It would be best to add your information to the panorama after stitching using a general purpose image editing program. There are many image editing programs available from other companies that have this capability.
Top of pagePrevious messageNext messageBottom of page Link to this message

Roland Heckert
New member
Username: Heckert

Post Number: 2
Registered: 6-2005
Posted on Monday, June 13, 2005 - 10:27 am:   Edit PostDelete Post

no watermarking: what a pity. It would be a useful extension in the next version of your program

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page